Danfoss Semco Fire Fighting Systems

DANFOSS SEMCO has a wealth of experience in providing optimized fire fighting solutions. Danfoss Semco has special expertise in integratiing equipments and processes. A flexible approach allows each case to be treated and each application to be fitted with a suitable system. From beginning to end, DANFOSS SEMCO offers a total solution including :

  • Fire risk analysis
  • System evaluation (ie. which technologies are best suited to a given project)
  • System design and sizing
  • Layouts and installation drawings
  • Installation, commissioning, start-up and service
  • International support

DANFOSS SEMCO is a leader in shipboard firefighting in full compliance with IMO/SOLAS resolutions, classification society guidelines and national authorities.


SEM-SAFE Water Water is forced through micro nozzles at very high pressure to create a water mist with the most effective firefighting drop size distribution. The system provides better protection for personnel and surroundings and minimises potential water damage. SEM-SAFE Water mist System.


High and Low Pressure CO2 System CO2 Systems are used as total flooding systems in engine rooms, machinery spaces and cargo holds. The high pressure system consists of a number of CO2 cylinders connected to a common manifold. The CO2 is directed into various protected spaces.


Foam Fire Extinguishing System Foam used in a fire protection is an aggregate of air-filled bubbles formed from aqueous solutions, and is of lower density than lightest flammable liquids. Foam can be used as a fire prevention, control or extinguishing agent for flammable liquid in tanls or processing areas.


Dry Chemical Powder Fire Extinguishing System When introduced directly to a fire, dry chemical powder extinguishes flames almost immediately. Dry chemical powder is intended for use in extinguishing fires involving bulk chemical agents and liquefied gases. The systems are developed to meet increasing demand for large capacity systems for gas carrier vessels.